For PoE cameras, you may connect the camera to the same router that the NVR is connected to for WiFi cameras, select the WiFi of the router that the NVR is connected to. Power the IP cameras using a DC power adapter. (An Ethernet cable is also needed during the initial setup for WiFi cameras)ī. You may connect the IP cameras to the PoE NVR directly via an Ethernet cable. There're two different ways of powering your IP cameras:Ī. Connect your Reolink IP cameras to the Reolink PoE NVR. You may then follow the steps below to add Reolink cameras to Reolink PoE NVR. The cabling for PoE NVR is shown as below. To do that, you need to add the camera to the NVR first. I think these are really the only things left.Reolink PoE NVR allows you to record videos for Reolink IP cameras without using a computer. I'd like to basically be able to do EVERYTHING through the client that you can do as if you were sitting in front of the NVR itself. Right now this can be done, but again, only directly on the NVR. Be able to rearrange the camera channel numbers in the client. If we had direct access to the cameras behind the NVR this would also be a lot easier to update the cameras. If we could manually update the camera firmware via the desktop client, this would be awesome. This isn't ideal as a lot of people have NVRs tucked away and don't always have a monitor nearby or connected to them. This goes with above, but right now we can't update the camera firmware unless in front of the NVR itself. That and tracking down all of the various firmware versions on the website is a nightmare. Especially when you have to download the update file, copy to a usb drive, hook a monitor and mouse up just to update. Looking through all of the revisions for all of the cameras, updating is kind of a pain once you start mixing different models on the NVR. I'd like to see automatic camera firmware update implemented as well. In the newer (current) firmware, the NVR can automatically update the NVR firmware. Either by allowing them to get a dhcp address from the network (not from the NVR itself) or somehow bridging the NVR network to the local lan. Direct access to cameras behind the NVR. Please let me know if you have any feedback or suggestions. When adding a device, if it is found that the device already exists in the device list, then the existing device will be highlighted. When adding a device using UID, UID is not case sensitive Improve the User Interface in Live view, Playback, Settings and other pages. (yayyy we finally added it back)Īdded AI detection filter to the Playback control bar.Īdded Black & White and Color Switching Threshold feature and Sync Brightness feature (Duo cameras) in the advanced setting in Display.Īdded the Beta Pet Detection option and adapted Pet Detection configuration to the Detection Alarm to devices that support AI pet detection.Īdded the AI alarm icon for devices that support AI detection on the Live View page.Ĭlick on the device on the Device List will jump to Live View or Playback of that device. You can download the beta client 8.4.0 installation package via the link: Beta Test for Reolink Client v.8.4.0Īdded Cut function on Playback download. The Client (PC software) 8.4.0 is now available for the beta test.
0 Comments
Leave a Reply. |